English
banner1-1

1.5 Mm End Mill - China Manufacturers, Factory, Suppliers

All we do is usually connected with our tenet " Customer to start with, Rely on initial, devoting on the food packaging and environmental protection for 1.5 Mm End Mill, Flat End Mill, Twist Fluted Drill, Tile Drill Bit,Two Flute End Mill. We're keeping chasing WIN-WIN situation with our consumers. We warmly welcome clientele from all around the environment coming above for a visit and establishing long lasting connection. The product will supply to all over the world, such as Europe, America, Australia,Nigeria, Congo,USA, Swedish.We integrate all our advantages to continuously innovate, improve and optimize our industrial structure and product performance. We will always believe in and work on it. Welcome to join us to promote green light, together we will make a better Future!

Related Products

45 HRC Square End mill-4 Flute D4mm (7)

45 HRC Square End mill-4 Flute D4mm

Read More
55 HRC Square End mill-4 Flute (5)

55 HRC Square End mill-4 Flute D4mm

45 HRC Carbide 2 Flute Standard Length End Mills (1)

45 HRC Carbide 2 Flute Standard Length End Mills

55 3F Endmill for Al (2)

HRC55 Carbide 3 Flute Long Length End Mills for Aluminum

alumium

55 HRC Carbide 3 Flute Roughing End Mill for alumium

266A2809

65 HRC Square End mill-4 Flute

45 HRC Carbide 2 Flute Standard Length Ball Nose End Mills (1)

45 HRC Carbide 2 Flute Standard Length Ball Nose End Mills

banner6

Top Selling Products

  • Related Blog
  • Related Videos
  • Reviews

  • Global Greyboard Market 2021 Development Status, Trending ...

    1.5 mm -2 mm; 2 mm above. Based on the end-use, the global market classified into: Food and Beverage Industry; Automotive Industry ...

  • Doré Copper Intersects 5.5 Meters at 3.46% Copper and 0.25 ...

    ... 0.87 g/t Au and 9.3 g/t Ag, including 1.5 meters of 5.25% Cu, 2.05 g/t Au and 12.7 ... our existing 2,700 tpd mil, with Corner Bay as the main feed to the mill. ... Samples were weighed, dried, crushed to 75% passing 2 mm, split 250 g, ... for the former producing Joe Mann mine (Au-Cu) by end of June 2021.

  • Fitch Rates Hillsborough County FL's $165MM Ser 2021 NAV ...

    Fitch Rates Hillsborough County FL's $165MM Ser 2021 NAV Rev Bonds ... the bonds provide for additional leveraging up to the 1.5x additional bonds ... The county has ample revenue raising flexibility under the statutory 10 mill cap, ... Pledged revenues for fiscal end 2020 of $61.6 million were down only ...

  • Press Briefing by Press Secretary Jen Psaki, Special ...

    I know we're very close to the tail end of when Gina has to go, so let's try to get around very quickly. ... Fall River — that have these huge mills that were, you know, teeming with people working in. .. that they're going for 1.5 degrees, and what they're doing will get them on track to do it. ... PSAKI: Mm-hmm.

  • TungMeister VFM Milling Head

    Using a solid carbide end mill to do face milling on small workpieces is ... milling head with S05 connection has a cutting diameter of 8.0 mm ...

  • Shrink-fit technology

    Raym-Co now runs at ±0.005mm on location and hole size. “A lot of that has to do ... “From roughing to finishing, as long as it's an endmill, it goes into shrink-fit.” ...
1.5 Mm End Mill Related Videos From Youtube

  • Elsa 2021.03.23 15:55:20

    The factory can meet continuously developing economic and market needs, so that their products are widely recognized and trusted, and that's why we chose this company.

  • Joanne 2021.02.15 08:23:43

    Goods just received, we are very satisfied, a very good supplier, hope to make persistent efforts to do better.

  • tobin 2021.02.13 23:22:12

    Good quality and fast delivery, it's very nice. Some products have a little bit problem, but the supplier replaced timely, overall, we are satisfied.

  • Jodie 2020.10.14 03:27:09

    We are really happy to find such a manufacturer that ensuring product quality at the same time the price is very cheap.

  • Pandora 2020.06.25 15:05:04

    The company's products very well, we have purchased and cooperated many times, fair price and assured quality, in short, this is a trustworthy company!

  • Muriel 2020.05.01 14:19:12

    As a veteran of this industry, we can say that the company can be a leader in the industry, select them is right.

related search

Send your message to us:

Write your message here and send it to us
Hit enter to search or ESC to close