Ball Nose End Mills

We believe in: Innovation is our soul and spirit. High-quality is our life. Purchaser need is our God for Ball Nose End Mills, Round End Mill, Finishing End Mill, Multi Flute End Mill, For further inquires please do not hesitate to contact us. Thank you - Your support continuously inspires us. owing to good service, a variety of high quality products, competitive prices and efficient delivery, we enjoy a good reputation among our customers. We are an energetic company with wide market for Ball Nose End Mills, Our company is working by the operation principle of "integrity-based, cooperation created, people oriented, win-win cooperation". We hope we can have a friendly relationship with businessman from all over the world.


  • HRC45 Carbide 4 Flute Standard Length End Mills

    HRC45 Carbide 4 Flute Standard Length End Mills

    Raw Material: Use YG10X with 10% Co content and 0.8um grain size.

    Coating: AlTiN, High aluminum content provides excellent hot hardness and oxidation resistance.

    Tolerance of End Mill Diameter:1 D≤6 -0.010 -0.030;6 D≤10 -0.015 -0.040;10 D≤20 -0.020 -0.050

  • HRC60 Carbide 4 Flute Roughing End Mill

    HRC60 Carbide 4 Flute Roughing End Mill

    Raw Material: Use ZK40SF with 12% Co content and 0.6um grain size

    Coating: AlTiSiN, with the hardness and thermal stability are up to 4000HV and 1200℃, respectively

    Tolerance of End Mill Diameter:1 D≤6 -0.010 -0.030;6 D≤10 -0.015 -0.040;10 D≤20 -0.020 -0.050

  • 60 HRC Square End mill-4 Flute

    60 HRC Square End mill-4 Flute

    Products Features

    1. Special Cutting Edge: Special cutting edge can increase the cutting ability. The lifetime of tools and machines will be longer

    2. Smooth And Wide Flute: Smooth and wide flute will remove the cuttings more easily

    3. Heat-resistant Coating: With highly heat-resistant HELICA coating, can be used for high-speed processing

    4. Bronze Coating: Under bronze coating, any abrasion is easy to be recognized

    5. High Quality Raw Material: The raw material is used of high toughness, grain-sized carbon tungsten

    6. Polished Surface Treatment: With high polished surface treatment, reduce the friction coefficient could be reduced, the lathe efficiency could be improved, more production time could be saved

  • 60 HRC Carbide 4 Flute Standard Length Corner Radius End Mills

    60 HRC Carbide 4 Flute Standard Length Corner Radius End Mills

    We hope we can establish long-term cooperation with all of the customers, and hope we can improve competitiveness and achieve the win-win situation together with the customers. We sincerely welcome the customers from all over the world to contact us for anything you need!Welcome all customers both at home and abroad to visit our factory. We hope to have win-win business relationships with you, and create a better tomorrow.
    Our company follows laws and international practice. We promise to be responsible for friends, customers and all partners. We would like to establish a long-term relationship and friendship with every customer from all over the world on the basis of mutual benefits. We warmly welcome all old and new customers to visit our company to negotiate business.

  • 60 HRC Carbide 2 Flute Standard Length Ball Nose End Mills

    60 HRC Carbide 2 Flute Standard Length Ball Nose End Mills

    Raw Material: Use ZK40SF with 12% Co content and 0.6um grain size

    Coating: AlTiSiN, with the hardness and thermal stability are up to 4000HV and 1200℃, respectively

    Tolerance of End Mill Diameter:1 < D≤6 -0.010 ~ -0.030;6 < D≤10 -0.015 ~ -0.040;10 <D≤20 -0.020 ~ -0.050

  • 45 HRC Carbide 4 Flute Standard Length Corner Radius End Mills

    45 HRC Carbide 4 Flute Standard Length Corner Radius End Mills

    Raw Material: Use YG10X with 10% Co content and 0.8um grain size. Flutes: 3 flutes, effectively mitigate vibra- tion and stable cutting
    A Type:Double-edge design provides good smooth finish and is suitable for semi-finish and finish machining.
    B Type: Single-edge design, sharp blade, good for chip removal, high cutting speed, widly used in rough machining.

  • 45 HRC Carbide 3 Flute Standard Length End Mills for Aluminum single-edge

    45 HRC Carbide 3 Flute Standard Length End Mills for Aluminum single-edge

    Raw Material: Use YG10X with 10% Co content and 0.8um grain size. Flutes: 3 flutes, effectively mitigate vibra- tion and stable cutting
    A Type:Double-edge design provides good smooth finish and is suitable for semi-finish and finish machining.
    B Type: Single-edge design, sharp blade, good for chip removal, high cutting speed, widly used in rough machining.

  • 45 HRC Carbide 3 Flute Standard Length End Mills for Aluminum double-edge

    45 HRC Carbide 3 Flute Standard Length End Mills for Aluminum double-edge

    Raw Material: Use YG10X with 10% Co content and 0.8um grain size. Flutes: 3 flutes, effectively mitigate vibra- tion and stable cutting
    A Type:Double-edge design provides good smooth finish and is suitable for semi-finish and finish machining.
    B Type: Single-edge design, sharp blade, good for chip removal, high cutting speed, widly used in rough machining.

  • 45 HRC Carbide 3 Flute Roughing End Mill for alumium

    45 HRC Carbide 3 Flute Roughing End Mill for alumium

    Raw Material: Use YG10X with 10% Co content and 0.8um grain size.
    Coating: AlTiN, High aluminum content provides excellent hot hardness and oxidation resistance. Application: Suitable for roughing milling general steel under hrc 45, cast iron, alloy steel, etc.